Course Description

16 Hour New Mexico Mechanical / HVAC Online Renewal Course – New Mexico

Approved by the State of New Mexico – Construction Industries Division (CID) | Provider #2025-720 | Course ID: 2025-727 ✅
Only $99 | Instant Certificate | 100% Online & Self-Paced

Renew your New Mexico Mechanical/HVAC license the fast, simple way with this CID-approved 16-hour online continuing education course. It’s built for busy HVAC and mechanical professionals who want to meet renewal requirements without sitting in a classroom. The course is 100% online, self-paced, and mobile-friendly, so you can log in and out anytime and pick up right where you left off.

You’ll receive an instant certificate of completion when you finish, and your credits are reported within 24 hours. Price is $99 total with no added or extra fees. Backed by a money-back guarantee, and supported by a real team you can call or text at 1-800-698-2770.

---

✅ Who Needs This Course?

This course is ideal for New Mexico professionals who need 16 hours of Mechanical/HVAC continuing education for renewal, including:

✅ Mechanical/HVAC license holders needing a complete 16-hour renewal option
✅ Technicians and contractors who want a single course that covers both code-focused and practical, field-ready topics
✅ Anyone who prefers to complete CE online on their own schedule (without losing progress)

---

✅ New Mexico Mechanical/HVAC CE & Renewal — What to Know

New Mexico mechanical/HVAC renewals commonly require 16 total hours of approved continuing education within the renewal cycle.

✅ Total CE Required: 16 hours
✅ Typical Breakdown: 8 hours code-related + 8 hours industry/trade-related
✅ Renewal Timing: Renew by your expiration date shown on your license/certificate (many New Mexico licenses renew on a 3-year cycle—always verify your specific expiration date)

This course is designed to help you satisfy the full 16-hour requirement in one place, including 8 code hours.

---

✅ How to Renew Your New Mexico Mechanical/HVAC License (Step-by-Step)

✅ Step 1: Confirm Your Renewal Deadline
Check the expiration date listed on your New Mexico license/certificate so you know exactly when you must renew.

✅ Step 2: Complete the Required CE Hours
Most Mechanical/HVAC renewals require 16 hours total, often including 8 hours of code-related training.

✅ Step 3: Finish This Online Course (On Your Schedule)
Complete the course 100% online. Log in and out anytime without losing your place.

✅ Step 4: Get Your Instant Certificate
Download your certificate immediately after completion for your records.

✅ Step 5: Credits Reported + Renew
Your credits are reported within 24 hours of completion. Then complete your renewal using the New Mexico CID renewal process.

---

✅ What You’ll Learn — Course Outline (16 Hours)

Hour 1: Administration, Scope, Permits, and Inspections
How mechanical code adoption works in New Mexico, scope of work, permits, inspections, responsibilities, and resolving conflicts.

Hour 2: General Regulations—Location, Access, and Protection
Working clearances, roof/attic/crawlspace access, condensate/corrosion protection, guards/barriers, restricted locations, listings/labels.

Hour 3: Ventilation Air—Design, Rates, and Verification
Outdoor air sizing, demand-controlled ventilation, filtration basics, special occupancies, balancing/verification, common inspection findings.

Hour 4: Exhaust Systems—Grease, Fume, and General Exhaust
Type I/II hoods, clearances/cleanouts/fire protection, specialty exhaust, toilet/laundry/garage exhaust, interlocks/makeup air, terminations.

Hour 5: Duct Systems—Materials, Construction, Fire/Smoke Control
Materials and pressure classes, sealing/leakage testing, supports/hangers, plenums and return pathways, fire/smoke dampers, NM-specific considerations.

Hour 6: Combustion Air—Indoor, Outdoor, and Engineered Designs
Confined spaces, makeup air, opening sizing and net-free area, combustion air ducts, engineered methods, field diagnostics.

Hour 7: Boilers and Hydronic Systems
Boiler safety devices, piping arrangements, balancing and commissioning, combustion air/venting, controls/interlocks, testing and maintenance.

Hour 8: Refrigeration Systems & Machinery Rooms
Refrigerant classifications, piping/valves/relief, machinery room ventilation and detection, access requirements, charging/recovery practices, signage/documentation.

Hour 9: Jobsite Safety for HVAC Professionals
PPE, hot work and fire watch, ladder/roof/fall protection, electrical safety/LOTO awareness, confined spaces, ergonomics, heat/cold exposure.

Hour 10: Load Calculations & Equipment Sizing
Sensible/latent loads, climate and elevation effects, envelope/infiltration/internal gains, system selection basics, oversizing risks, documentation.

Hour 11: Duct Design, Leakage, and Air Balancing
Friction-rate design, fittings/equivalent length, leakage testing and sealing, diffuser/throw selection, TAB fundamentals, noise/vibration control.

Hour 12: Controls, Thermostats, and Sequences
Control architectures, economizers and demand response, heat pump/dual-fuel staging, setbacks/deadbands/schedules, sensor placement, alarms.

Hour 13: Commissioning, Start-Up, and Documentation
Pre-functional checklists, start-up procedures, functional performance testing, O&M manuals and as-builts, owner training, seasonal recommissioning.

Hour 14: Refrigerants & A2L Transition—Safety and Best Practices
A2L properties and risk controls, tools/recovery updates, leak detection and ventilation, storage/transport/labeling, retrofit vs replacement, training.

Hour 15: Indoor Air Quality—Filtration, Humidity, and Ventilation
Filtration strategies and MERV, humidity control in arid climates, ERV/HRV selection, source control and dilution, IAQ monitoring, occupant communication.

Hour 16: Business Practices, Estimating, and Ethics
Scope clarity and change orders, labor/overhead/profit, scheduling and coordination, warranty/service agreements, recordkeeping, ethics and customer care.

---

✅ Why Choose 1st Choice CE?

✅ Approved New Mexico Course (CID) – Provider #2025-720 | Course ID: 2025-727
✅ Only $99 — No added or extra fees
✅ 100% Online and Mobile Friendly
✅ Self-Paced Access — Log in/out anytime
✅ Instant Certificate of Completion
✅ Credits Reported Within 24 Hours
✅ Money-Back Guarantee
✅ Over 10 Years of Trusted CE Service
✅ Support by Phone or Text — 1-800-698-2770

---

Support When You Need It

✅ Have a question about New Mexico Mechanical / HVAC CE, your license class, or this course? Call or text us at 1-800-698-2770.

We also speak Spanish.

Enroll Now

✅ Enroll in the 16 Hour New Mexico Mechanical / HVAC Online Renewal Course for $99 and complete your full renewal CE in one streamlined, self-paced course.

Frequently Asked Questions

Is this course approved in New Mexico?

Yes. It is approved by the New Mexico Construction Industries Division (CID) under Provider #2025-720 and Course ID 2025-727.

How many CE hours does the course provide?

16 credit hours, typically broken down into 8 hours of code content and 8 hours of industry/trade content.

How much does the course cost?

$99 with no added or extra fees.

Is the course online and self-paced?

Yes. The course is 100% online and self-paced. You can study from a phone, tablet, or computer and log in and out as needed.

When will I get my certificate?

You can download your instant certificate of completion the moment you finish.

Do you report my credits to the state?

Yes. We report your credits within 24 hours of completion.

What does the course cover?

Administration and permits, general regulations, ventilation, exhaust, duct, combustion air, boilers and hydronic systems, refrigeration, jobsite safety, load calculations, duct design, controls, commissioning, refrigerants and A2L transition, indoor air quality, and business practices and ethics.

Who should take this course?

New Mexico Mechanical / HVAC license holders, technicians, and contractors who need 16 hours of approved CE for renewal.

When does my New Mexico license expire?

Renewal cycles vary by license type. Many New Mexico licenses run on a 3-year cycle. Always confirm your expiration date through your New Mexico CID account.

Is there a money-back guarantee?

Yes. The course is backed by a money-back guarantee.

What if I need help during the course?

Call or text us at 1-800-698-2770 and a team member will help. Spanish speakers welcome.

 

Course Details

• New Mexico Approved Provider
• Course ID #2025-727
• 16 Credit Hours.
• Instant Access - Online Course.
• Study At Your Own Pace. Anytime.
• On Any Device. Phone, Tablet, or Computer.
• Hassle Free Navigation. Easy to Follow.
• Certificate emailed immediately upon completion.
• 1-800-698-2770 for any questions.